Today, while in pain, I’ve replaced the RG-213 coax runs on the SCAM12 with Ultraflex-7. I estimate the weight redu… https://t.co/hmg5WWxZtk

Tonight I stated boxing my @DXING 144 MHz Anglian transverter. Just the wiring to finish. Planning to use it with… https://t.co/o18WOyACaM

Here is a picture of my V-2000 6m/2m/70cm co-linear antenna mounted on its new home in the SCAM12 (above the YU7EF… https://t.co/oYjeSVnSgu

The control box for the satellite phasing. As usual, I used PowerPoint to make the front panel decal. Testing on lo… https://t.co/R7ibVMZFLB

Time to mount the 2m beam and see if the PGA144 preamp (bodged onto a DG8 PCB for RF switching), and the 1:1 balun,… https://t.co/4OzY7aOjtr

Eventually got round to making the 1.5″ to 2″ adaptor plate so I can replace the V2000 colinear, which sits at the… https://t.co/eUAylFRZvA

The 4m, 6m & 2m beams are back up. I still have to; install the boom support ropes (to stop the booms sagging), mov… https://t.co/dnINCpAapj

Modded an old Brodit mount, I think is from my Samsung Note 2, to have USB-C and fit my Note 8 with the case on it… https://t.co/Y9AkHhZ5zK

Just finished building my @DXING PGA144 preamp. I’m going to replace my DG8 with it as the PGA144 has a better NF (… https://t.co/NITgRwsQME

Last night I fitted a @gm3sek mid-band choke to my 40m OCF dipole after getting sick of the RFI buzz on my PC speak… https://t.co/YNyTL5nwli