From the mind of Gavin MM1BXF…
As with my other radios (IC-756pro3 IF Tap page, IC-910H IF Tap page & IC-706mk2G IF Tap page) I wanted to tap the IF (Intermediate Frequency 68.33MHz) out of my Yaesu FT-817 to allow monitoring on an SDR radio and…
Read more
As with my other radios (IC-756pro3, IC-910H & FT-817) I wanted to tap the IF (Intermediate Frequency) out of my Icom IC-706Mk2G to allow monitoring on an SDR radio and associated software. The IC-706Mk2G has two IF frequencies, I tapped…
Read more
The Icom IC-756pro3 has 2 options for tapping the IF, one is at 64.455MHz and the other is at 13.345MHz taken from the bands scope circuit. This article covers tapping the IF at 64.455MHz which I found more useful for…
Read more
I looked about on the net for how to modify my Icom IC-910H to bring the main band IF out on a connector at the rear of the radio but couldn’t find anything so I dug out my service manual…
Read more